Відео

The ratings are good to 600lbs. But I've capped it at 250lbs for safety. Honestly, even at that though the sag on the cable is too much to enjoy. 140lbs over that distance, height and just "turn buckle tension" is a preferred max load for enjoyment.

@@Cibervirus83 do you have a link to the door trolley bearing

Cold liquid propane (in october my supply tank is stored outside) being vaporized off into a sealed container does not vaporize like if you just open your tank to the atmosphere outside. The full tank pressurizes the empty tank in a second, but that vaporization of propane without a pressure drop takes quite a while to occur on its own in an equal pressure siphon scenario. And you need a tank of just vapor and not mostly liquid to get a fireball with only a second of valve release. Liquid can't vaporize fast enough. You could heat one tank and chill the other to speed yourself to over 100psi, but I'm never in a hurry.

The ground comes up quick enough at the end to put your feet down and run it out to a stop.

There's only one mesh sheet sandwiched between the two frames. In it's current form you could just lift the top frame of the pins and have access to the mesh edges for cleaning or changing. But once the frames sandwich the mesh, i rarely ever remove frames...just clean the mesh top and good to go. No disassembly required.

@@Cibervirus83 I was just thinking of the portion of the vid where you mentioned how having a second sheet was a bother. I was just offering another way for whomever may want to try this.

Brass would be fine. Just use a sealant on threads rated for gas.

@@Cibervirus83 so I shouldn’t use plumbing ones?

Man I would love to except after 5 years of the entire neighborhood of children and adults riding it there has yet been an injury to speak of.

@@Cibervirus83you mean there’s no victims left alive to speak? Good plan!

This guy is also tired of the disposable world we live in. I kind of enjoy my dollars saved over 10 years so far.

I’ve spent decades working around septic systems and although the metal lint screens may be cheap, they don’t work very well. You still end up with a lot of lint and fibers in your septic system, which can shorten its life because the fibers don’t break down at all (if there synthetic) or take a very long time to break down for stuff like cotton. This lint ends up creating a layer in your drain field that eventually plugs up the soil pours, causing your system to fail. If you don’t have a private septic it’s not a big deal but if you do have a private septic it’s important to have a good lint trap on your washing machine

😂 this wouldn't even take half an hour to put together "adonisman"

@@steveareeno65So, do you recommend this lint trap? If not, what do you recommend? I bought a lint trap from Lowes and after 6 washes, I have to chuck it. Any suggestions are welcomed. Thanks

I'm a no bullshit kinda guy. :)

But styrofoam isn't a gas, how is it going to come out if the nozzle?

@@GOAT_GOATERSON napalm is a mixture of styrofoam and gas. The gasoline dissolves the styrofoam making it a sort of gel. It shoots really far and burns really long. Just look up "how to make napalm".

@@_Belteshazzar_ dude, nice

Ah yes,Vietnam war flamethrower strategies

Fuck ANTIFA

Ben Smith they need someone like me to infiltrate and catch them all on fire!

@@peacepipes304 good plan 😂

Can someone please explain what Antifa is? I'm European and I've looked it up on Google but I can't find what they stand for and stuf.

We may be using different tanks. This fire extinguishers green mark is labeled at 185 psi. In fact to charge the tank the pressure must exceed 200psi to open the valve. The tank is rated to 400psi. I charge to 185psi and that flame will go a long time if i don't back off on it. A 10sec blast only consumes about 2 cups of gas. I've put a whole gallon through it before in one-shot with no effect on tank pressure.

You're gonna need a big cannon. I'm always up for spit balling some ideas. I'm thinking for power and size you may want to look into air cannon styles rather than combustion style launchers. The size I use should probably be max for firing in close proximity for safety.

​@@Cibervirus83 Yeah, that's what I was thinking.. the probe isn't too bulky though,. but I'd like to be able to fire it at a safe distance with it still being mobile. Open to any ideas.

I frequently ride it at 145lbs. My brother has been down it at 225lbs. Although the trolley didn't seem to mind, the cable itself slacked so bad he couldn't lift his feet from the ground. I imagine the steel bearings in the wheels of the trolley can support child weight fairly easily for an extended period of time.

No one said that you couldn’t use fire

Hol up

Wait, that's illegal!

r/holdup

o_0

A Pacheco I fear no man...

@@thefacelesslad8429 But that THING. Its scared me

@@afifgozali8611 he's not here is she?

@@thefacelesslad8429 how do i get this Fucking thing off?

@@afifgozali8611 One shutters to image what inhuman thoughts lie behind that mask.

haha funny bro 100% havent seen this a thousand times before on every remotely dangerous video

How do you know for sure you've made the feds watch list?

@@odavido1579 try to buy a gun

Me who doesn’t live in the USA

Lol

Don’t forget the Nepalm